Battery Voltage - Cadillac 2010 DTS Owner's Manual

Hide thumbs Also See for 2010 DTS:
Table of Contents

Advertisement

TIMER ON/OFF
This display can be used like a stopwatch. You can
record the time it takes to travel from one point to
another. To access the timer, press the trip/fuel button
until 00:00:00 TIMER OFF displays.
To turn on the timer, press the set/reset button until
TIMER ON displays. The timer will then start.
To turn off the timer, press the set/reset button again
until TIMER OFF displays. The timer will stop and
display the end timing value.
To reset the timer, press and hold the set/reset button
after the timer has been stopped. The display will return
to zero.
AVERAGE SPEED
This display shows the average speed of the vehicle in
either kilometers per hour (km/h) or miles per
hour (mph). This average is calculated based on the
various vehicle speeds recorded since the last reset of
this display. To reset this display, press the set/reset
button. The display will return to zero.
4-64

BATTERY VOLTAGE

This display shows the current battery voltage. If the
voltage is in the normal range, the value will display. For
example, the display may read BATTERY VOLTAGE
13.2 VOLTS. If the voltage is low, the display will show
LOW. If the voltage is high, the display will show
HIGH. Your vehicle's charging system regulates voltage
based on the state of the battery. The battery voltage
may fluctuate when viewing this information on the DIC.
This is normal. See Charging System Light on
page 4-52 for more information.
If there is a problem with the battery charging system,
the DIC will display a message. See DIC Warnings
and Messages on page 4-67 and Electric Power
Management on page 4-33 for more information.
Blank Display
This display shows no information.

Advertisement

Table of Contents
loading

Table of Contents