Storing Name Tags - Cadillac 2010 Escalade Owner's Manual

4. Say the name of the phone to be deleted. If the
phone name is unknown, use the List command
for a list of all paired phones. The system responds
with Would you like to delete <phone name>? Yes
or No followed by a tone.
5. Say Yes to delete the phone. The system
responds with OK, deleting <phone name> .
Linking to a Different Phone
1. Press and hold
responds with Ready followed by a tone.
2. Say Bluetooth . The system responds with
Bluetooth ready followed by a tone.
3. Say Change phone . The system responds with
Please wait while I search for other phones .
If another phone is found, the response will be
<Phone name> is now connected .
If another phone is not found, the original
phone remains connected.

Storing Name Tags

The system can store up to thirty phone numbers as
name tags that are shared between the Bluetooth and
OnStar systems.
for two seconds. The system
The system uses the following commands to store and
retrieve phone numbers:
Store
Digit Store
Directory
Using the Store Command
The store command allows a phone number to be
stored without entering the digits individually.
1. Press and hold
responds with Ready followed by a tone.
2. Say Store . The system responds with Store,
number please followed by a tone.
3. Say the complete phone number to be stored at
once with no pauses.
If the system recognizes the number it
responds with OK, Storing and repeats the
phone number.
If the system is unsure it recognizes the phone
number, it responds with Store and repeats
the number followed by Please say yes or no .
If the number is correct, say Yes . If the
number is not correct, say No . The system will
ask for the number to be re entered.
for two seconds. The system
4-71