Measurement Of Feno In Exhaled Breath; Attaching The Disposable Mouthpiece - Bosch Vivatmo me Instructions For Use Manual

Measurement of FeNO in exhaled breath

2 Measurement of FeNO in exhaled breath
en
2.1

Attaching the disposable mouthpiece

The Vivatmo me disposable mouthpiece chemically prepares the breath test sample. Human breath is cleaned from
contaminants and stabilized to guarantee reliable test results. Use the disposable mouthpiece directly after opening the
pouch. The disposable mouthpiece must be attached firmly to perform a measurement.
10 © Bosch Healthcare Solutions GmbH
1. Remove the protective cap from the device.
2. Open the pouch of the disposable mouthpiece.
3. Check the device and disposable mouthpiece and do not use when any damage is noted.
4. Attach the disposable mouthpiece firmly and make sure that it fits securely on the device.
The disposable icon on the display stops moving.
5. "Invalid mouthpiece" is shown on the display if more than 5 attempts have been performed with
the same mouthpiece or if the filter capability is used up by the reconditioning.
Remove the mouthpiece and attach a new one.
Instructions for use