Download Print this page

Cooper IB520081ML Installation Instructions Manual

Multi head mud-in

Advertisement

Available languages

Available languages

Quick Links

IB520081ML
Installation Instructions – Multi Head Mud-In
Directives d'installation – Luminaire multitête encastré
sous plâtre
Instrucciones de instalación - Cabezales múltiples de
acabado
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this
product must be performed by a qualified electrician. This product must be installed in accordance
with the applicable installation code by a person familiar with the construction and operation of
the product and hazards involved.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or
attempting any maintenance. Disconnect power at fuse or circuit breaker.
Risk of Fire- Minimum 90°C supply conductors.
Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Failure to comply with these instructions may result in death, serious bodily injury and property
damage.
DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind
that may arise from the improper, careless, or negligent installation, handling or use of this product.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
NOTICE: Fixture may become damaged and/or unstable if not installed properly.
Note: Specifications and dimensions subject to change without notice.
Note: This fixture should be supported by main runners or other structure that is capable of supporting fixture
weight of 40 Ibs.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on
delivery receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be
filed within 15 days of delivery. All damaged material, complete with original packing must be retained.
WARNING
INS #

Advertisement

loading

Summary of Contents for Cooper IB520081ML

  • Page 1 Failure to comply with these instructions may result in death, serious bodily injury and property damage. DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may arise from the improper, careless, or negligent installation, handling or use of this product.
  • Page 2 (Figure 1.2). Bars are ordered separately. Figure 1.3. Cooper Lighting accessory bars are available: Once the connections are made, attach unit with the RMB22 = Adjustable wood joist mounting bars, pair, feet of hangerbars on the bottom side of the framing.
  • Page 3 Sheet Rock To finish - apply a generous amount of joint compound on trim flange. Mud-in up to the trim, around the edge of the fixture. (Figure 1.12) Fixture Mud-in Trim Figure 1.9. Figure 1.12. Cooper Lighting Solutions IB520081ML Installation instructions...
  • Page 4 La désobéissance aux instructions suivantes représente un risque de blessures graves ou mortelles et de dommages matériels. EXONÉRATION DE RESPONSABILITÉ : Cooper Lighting Solutions n’assume aucune responsabilité pour les dommages ou pertes de toute nature pouvant découler d’une installation inappropriée, imprudente ou négligente et d’une mauvaise manipulation ou utilisation de ce produit.
  • Page 5 à l’aide des supports de montage sur le côté du boîtier (Figure 1.2). Les barres se commandent Une fois les connexions effectuées, fixez l’unité aux séparément. Barres accessoires de Cooper Lighting pieds des barres de suspension dans le bas de la offertes : charpente (Figure 1.4).
  • Page 6 Pour terminer, appliquez une quantité généreuse de gyproc pâte à joint sur la bride de la garniture. Plâtrez jusqu’à la garniture autour du bord du luminaire. (figure 1.12) Luminaire Garniture de plâtrage Figure 1.9. Figure 1.12. Cooper Lighting Solutions IB520081ML Instructions d’installation...
  • Page 7 El incumplimiento de estas instrucciones puede ocasionar la muerte, lesiones corporales graves y daños a la propiedad. RENUNCIA DE RESPONSABILIDAD: Cooper Lighting Solutions no asume ninguna responsabilidad por daños o pérdidas de ningún tipo que puedan surgir por la instalación, manipulación o uso inadecuado, descuidado o negligente de este producto.
  • Page 8 Una vez hechas las conexiones, fije la unidad con las del alojamiento (Figura 1.2). Las barras se piden por patas de las barras de suspensión en la parte inferior separado. Las barras accesorias Cooper Lighting que del marco (Figura 1.4). están disponibles: RMB22 = Barras de montaje de viguetas de madera ajustables, pares, se extienden hasta 22 in...
  • Page 9 Para terminar, aplique una cantidad generosa de Tablaroca compuesto para juntas en la brida de la moldura. Acabado hasta la moldura, alrededor del borde de la luminaria. (Figura 1.12) Luminaria Moldura de acabado Figure 1.12. Figure 1.9. Cooper Lighting Solutions IB520081ML Instrucciones de instalación...
  • Page 10 Garantías y Limitación de Responsabilidad Visite www.cooperlighting.com/legal para conocer nuestros términos y condiciones. Cooper Lighting Solutions 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 Cooper Lighting Solutions is a www.cooperlighting.com registered trademark. All trademarks are property Canada Sales of their respective owners.