Table of Contents
Advertisement
is already on. Press the RDS SELECT button. Then
press and hold the RDS button for two seconds.
REGION: ON will appear on the display. While
REGION: ON appears, on the display, press the RDS
button again to turn the region function off. REGION:
OFF will appear on the display. The region function can
be turned on again by pressing the RDS button.
TA ( 2 ) : Press the RDS SELECT button, ,followed by
this button to receive traffic announcements. The radio
will-turn on the TA'display. TP will appear on the
display if the tuned station broadcasts traffic
announcements. You may also receive traffic
announcements from stations in the network related to
the tuned station. If the current tuned station does not
broadcast traffic announcements, the radio will seek to a
station which does. When the radio finds -a station which
broadcasts traffic announcements, it will stop. If no
station is found, NONE FOUND will appear on the
display. When SEEK or SCAN is pressed with the
traffic announcement function on, the radio will only
stop at stations which broadcast traffic announcements.
While a tr&c announcement plays, the radio uses a
special
type
of volume called TA volume. To increase TA
volume,
turn
the PWRNOL knob to the right.
T u r n
it to
the left to decrease volume. TA VOLUME 'will appew, on
the display while the volume is being adjusted.
When a traffic announcement comes on the tuned radio
station or a related network station, you will hear
it,
even if the volume is muted or a cassette tape or
compact disc is playing. If the radio tunes to a related
network station for a traffic announcement, it will return
,
to the original station when the announcement is
finished. If the cassette tape or compact disc player was
being used, the tape or compact disc will stay in the
player and resume play at the point where
it stopped.
Press the RDS SELECT button, followed by this button
again to turn TA off.
MSG. (3): When RDS is on,
if the current station has a
message, MSG will appear on the' display. Press the
RDS SELECT button, followed by this button to see the
message. If the whole message does not appear on the
display, parts of the message will appear every three
seconds until the message is' completed.
To
see the parts
of the message faster than every three seconds, press
this
button again. A new group of words will appear on the
display. Once the complete message-has been displayed,
MSG will disappear from the display until another new
MSG is received. Each message can only be read once.
PTY
(4): This button is used to
turn
on and off
P r o g r a m '
T j q ~ (PTY)
seeks adscans. , h s s the RDS SELECT
button, followed ,by
this
button. The PTY display will
turn
on. RDS SELECT:
PTY
NEWS
will
appear on the display
3-25
Advertisement
Table of Contents
