Table of Contents
Advertisement
Automatic seat and mirror movement is programmed
through the Driver Information Center (DIC) so that the
driver can select whether or not movement will occur
using the
RKE
transmitter or by placing the ignition key
in the ignition. For programming information, see
"Programmable, Memory and Personalization
Features" in the Index.
Heated Front Seat (Option)
The control is located on the outboard side of each front
seat. Move the SEAT HEAT control to either LO or HI
to turn on the heating elements in the seat.
The
LO
setting
warms
the seatback and cushion until the seat
approximates body temperature. The
HI
setting heats the
seat to a slightly higher temperature.
A telltale light in
the control reminds you that the heating system is in use.
The heated seats can only be used when the ignition
is
turned on.
Reclining Front Seatbacks
Press the recliner control forward or rearward to adjust
the seatback.
1-4
Advertisement
Table of Contents
