Remove / Install Mower Deck - Gravely Pro-Stance 48 Operator's Manual

REMOVE / INSTALL MOWER
DECK
Remove Deck
1. Place unit in service position. See
Service Position on page 19.
WARNING: AVOID INJURY!
Springs store energy. Keep
body parts well away from
pinch points when removing the
deck.
2. Remove PTO belt from clutch. See
Remove PTO Belt on page 30.
WARNING: AVOID INJURY.
Mower lift arms and lift pedal
could cause severe injury if the
lift-assist springs are not
disconnected before the lift
links.
3. Engage transport lock and slowly
disconnect lift-assist springs from mower
lift arms on each side of deck. See
Figure 41.
1
1. Mower Lift Arms
2. Deck Lift-Assist Spring
Figure 41
NOTICE: Position supports such as blocks or
jack stands under each side of the deck.
4. Release transport lock and slowly lower
deck until it rests on supports.
5. Remove hardware securing mower lift
links to the deck. See Figure 42.
1. Mower Lift Link
2. Mounting Hardware
7. Remove the front mounting pin hardware
and drag link mounting pins. See
Figure 43.
8. Slide deck out from under unit.
2
3
1. Drag Link
2. Drag Link Mounting Pin
3. Mounting Pin Hardware
EN - 33
1
2
Figure 42
2
1
Figure 43