Service Parts; Check Safety Interlock System; Check Hydraulic System - Gravely Pro-Stance 48 Operator's Manual

SERVICE PARTS

See your Gravely dealer to purchase service
parts for your unit.
Description
Air Filter Outer Element
Air Filter Inner Element
Engine Oil Filter –
Kawasaki (Models 994132,
133, 137)
Spark Plug – Kawasaki
(Models 994132, 133, 137)
Fuel Filter – Kawasaki
(Models 994132, 133, 137)
Engine Oil Filter – Kohler
EFI (Models 994142, 143)
Spark Plug – Kohler ZT 730
(Models 994134, 142, 143)
Air Filter – Kohler ZT 730
(Models 994134, 142, 143)
Fuel Filter– Kohler ZT 730
(Models 994134, 142, 143)
Hydraulic Oil Filter
PTO Belt (Engine to Deck)
– 48"
PTO Belt (Eng ine to Deck)
– 52"
PTO Belt (Engine to Deck)
– 60"
Traction Belt (Hydro Pump)
Mower Blade – 48"
Mower Blade – 52"
Mower Blade – 60"
CHECK SAFETY INTERLOCK
SYSTEM
Parking Brake Interlock System
With the parking brake engaged, the steering
levers must be locked in neutral.
With the parking brake disengaged, the
engine must not start and the engine must
shut off if the operator releases the control
lever. See Before Operation on page 16. If
system does not operate correctly, see your
dealer for repair. DO NOT operate until
repairs are made.
Qty Part No.
1 21537000
1 21536900
1 21535800
2 21536100
1 21538400
1 20715100
2 21500009
1 21500010
1 21545700
2 21545100
1 07200706
1 07200712
1 07200713
1 07226400
3 00450200
3 00450300
3 09081200
EN - 21

CHECK HYDRAULIC SYSTEM

Check Hydraulic Oil Level
See Figure 19.
1. Place unit in service position and open
the rear access panel. See Service
Position on page 19.
2. Check oil level in expansion tanks. Oil
should reach the cold fill indicator mark.
IMPORTANT: Engine should be cold when
checking initial oil level.
1. Cold Fill Indicator Mark
Figure 19
3. Operate engine for 1 minute and recheck
oil levels.
4. Add hydraulic oil, if needed. See Add
hydraulic oil, if needed. on page 21.
Add Hydraulic Oil
1. Place the unit in service position and
open the rear access panel. See Service
Position on page 19.
2. Remove hydraulic oil expansion tank
caps.
3. Fill expansion tanks with 15W-50
synthetic motor oil (Gravely p/n
00057100) or equivalent until oil reaches
the cold fill indicator mark. See Figure 19.
4. Reinstall expansion tank caps.
1