Installing The Server In The Rack Cabinet - Fujitsu PRIMERGY PG-R1CK1 User Manual

9

Installing the server in the rack cabinet

Perform the following steps to install the rackmount converted server into the rack cabinet.
Choosing the server's position (height) in the rack cabinet
1
Open the rack cabinet.
Open the front and rear doors of the rack cabinet.
2
Place the server in the rack.
You can choose several various heights
to place the server in the rack by aligning
the base of the server to match to any
narrow space (in the rack support).
Installing the rails assembly
1
Attach the spring-nuts to the rack.
Insert the spring-nuts into the rack grooves as shown in Fig. 1-4, below. The height of
the spring-nuts can be adjusted once placed inside the rack groove by sliding each nut up
or down by hand (Fig. 5).
18 Conversion procedure
(For a "standard-type" rack cabinet)
45˚
3
1
4
[Rack support]
Server baseline
Narrow
space
2
5
5