Updating The Chassis Id - Fujitsu PRIMERGY PG-R1CK1 User Manual

12

Updating the Chassis ID

After installing the server to the rack, update the chassis ID as follows:
1
Check that no media has been left in the floppy disk drive, CD-ROM,
etc.
2
Turn on the display and any attached peripherals.
3
Turn on the server.
After turning on the server's power,
(switch is located at the front of the
server), the "POST (Power On Self
Test)" screen will appear.
4
Insert the ServerWizard CD while the POST screen is displayed and
press [Ctrl]+[Alt]+[Delete] to reboot the server.
5
Select "Basic (BIOS Environment Support Tools)" from menu and press
[Enter].
6
Insert the "PRIMERGY B225 Rack Conversion Tool)" disk provided with
the kit into the floppy disk drive and type the following commands:
C:\>b:
B:\>SMBVIEW -INI=b225r.ini
The following message appears when properly executed.
SMBUS/I2C VIEWER V1.39
OK: IdpPatchChassis: "B225R","17H","$
Ret=0
26 Conversion procedure
[Enter]
Power Switch
[Enter]
","$ "