Removing The Left Side Cover - Fujitsu PRIMERGY PG-R1CK1 User Manual

B225 rack conversion kit
Table of Contents

Advertisement

3
Remove the drive cover.
After opening the drive cover, press the
latches inward on both sides and pull off to
remove.
4

Removing the left side cover

1
Remove the 2 retaining thumbscrews (M3) located at the rear.
10
Conversion procedure
Do not lose these screws since they will be used later to reat-
tach this cover.
Latch

Advertisement

Chapters

Table of Contents
loading

Table of Contents