Cable Routing Through The Top Cover - Fujitsu PRIMECENTER M1 User Manual

5.5.2

Cable routing through the top cover

The 42 HU racks offer the possibility to route cables through the top cover by
means of the brush panel kit. Two special outlets have been foreseen which can
be opened by cutting through the micro-joints of the cover sheet.
I
Cable routing via the outlet without the brush panel kit is not allowed,
because cables may be damaged by sharp edges.
The following parts are delivered with the brush panel kit:
Figure 25: Delivered parts of the brush panel kit
1 Edge protector
2 Top cover brush (2x)
Cable Inlets and Outlets
51