Fujitsu PRIMERGY PG-R1CK6 User Manual page 76

Installing the rail
(For "slim-type" rack only)
1
Assemble the rail assemblies.
Attach the rail brackets (A, B, C) to the rail using the screws (M5) provided. Attach
brackets A and B to the inner side of the rail and fasten. Attach bracket C to the rear rails
and lightly fasten the nuts (see diagram).
[Left]
Bracket A
M5 screws
2
Fasten the rail assemblies
Extend each rail bracket to align with
the rack width and tighten the screws
for bracket C to firmly fasten the rear
rail brackets to the rack.
Bracket B
Bracket C
Rail
M5 screws
[Front]
[Front]
[Left of rack cabinet]
12 Converting to a rackmount model
M5 screws
[Right]
M5 screws
Rail
Bracket A
[Rear]
Hole
Hole
Latch
[Rear]
Bracket B
Bracket C
E
Latch
Frame
25