Fujitsu PRIMERGY PG-R1CK6 User Manual page 68

Preparation
1
Turn and place the server upside down.
2
Detach the 2 stabilizer legs from the bottom of the server.
Remove the M3 screws (4 per leg) to
detach the legs from the server.
3
Remove the left plate at the base of the server.
Remove the 3 retaining screws (M4) fixing the
plate and slide the plate to the rear to remove.
[Bottom of the server]
＝Screw holes
Plate
7 Repositioning devices
Stabilizer legs
E
17