Dic Compass - Buick 2007 Rendezvous Owner's Manual

TIRE PRESSURE: The check tire pressure
system can alert you to a large change in the
pressure of one tire. If the tire pressure is normal,
TIRE PRESSURE NORMAL will display. If the
tire pressure is low, LOW TIRE PRESSURE will
display. You must begin driving before the
system will detect a low tire pressure condition.
See Check Tire Pressure System on page 414.
USE SET TO SELECT ENGLISH METRIC: You
can use this display to select English or metric.
Press the SET button to toggle between English or
metric. The DIC, the odometer, the trip odometer
and head-up display will change. A Canadian
odometer and trip odometer will remain in metric
units only.
OFF: No driver information will be displayed in
this mode. If the DIC is left in this mode for more
than three seconds, the display will turn off.
Press the MODE button to start the DIC.
238

DIC Compass

Your vehicle has a compass in the Driver
Information Center (DIC).
Compass Variance
Compass variance is the difference between
magnetic north and geographic north. In some
areas of the country, the difference is great enough
to cause the compass to give false readings. If
this occurs, the compass must be recalibrated.
Compass Calibration
If the calibration required symbol, or C, appears in
the compass, you must manually put the
compass into the calibration mode. To enter this
mode, do the following:
1. Turn the ignition on and press the MODE
button until CALIBRATE COMPASS
displays.
2. Press and hold the SET button for longer than
three seconds.