Table of Contents
Advertisement
The remote vehicle start feature will not operate if
any of the follow occur:
•
The remote start system is disabled through
the DIC.
•
The vehicle's key is in the ignition.
•
A door on the vehicle is open.
•
The vehicle's hood is open.
•
The hazard warning flashers are on.
•
The check engine light is on. See Malfunction
Indicator Lamp on page 3-41.
•
The engine coolant temperature is too high.
•
The oil pressure is low.
•
Two remote vehicle starts have already been
provided for that ignition cycle.
If a remote start is attempted and is unsuccessful, the
Driver Information Center (DIC) will display REMOTE
START DISABLED.
Vehicles that have the remote vehicle start feature
are shipped from the factory with the remote vehicle
start system enabled. The system may be enabled
or disabled through the DIC. See "REMOTE START"
under DIC Vehicle Personalization on page 3-73
for additional information. If your vehicle does not have
the DIC feature, and remote vehicle start was installed
at the dealership, you will need to have the dealership
enable or disable the system.
Remote Start Ready
If your vehicle does not have the remote vehicle start
feature, it may have the remote start ready feature. This
feature allows your dealer to add the manufacturer's
remote vehicle start feature.
If the keyless entry transmitter has a plus (+) symbol
on the back cover, your vehicle has the remote
start ready feature. You can lock or unlock your
vehicle from approximately 492 feet (150 m) away.
See your dealer if you would like to add the
manufacturer's remote vehicle start feature to
your vehicle.
2-9
Advertisement
Chapters
Table of Contents
