Husqvarna 536LiL Workshop Manual page 46

Repair Instructions
9.7 Dismantling the control unit
For products with S/N: 2015080001- (536LiL,
536LiLX), 20151000001- (536LiR, 536LiRX).
1
Dismantle the operating handle (LiL).
Dismantle the handle arm (LiR).
Refer to "Basic dismantle/assembly".
2
Dismantle the wear guard under the battery housing.
Refer to "Basic dismantle/assembly".
3
Dismantle the battery housing.
Refer to "Basic dismantle/assembly".
4
Loosen the screws (G) to the control unit and the
screws (H) to the battery contact and lift out the
entire unit and the fan.
See figure 13b.
5
Disconnect wires (A, gray), (B, black) and (C, red)
to the motor, disconnect connector (D) for the
keypad, main switch and to the fan.
See Figure 14b.
Cleaning and inspection
Clean and inspect all parts of the control unit. The
control unit must always be replaced with a new
one if cracked or showing signs of other defects.
Always use original spare parts.
See figure 16b.
46 –
English
Fig 13b
D
A
C
Fig 14b
G
H
H
G
B