Memory Seat - Buick 2003 Rendezvous Owner's Manual

Memory Seat
To recall your memory positions, your vehicle must be
in PARK (P). Push and release the memory button
If your vehicle has this
feature, the controls are
located on the driver's door you will hear one beep.
Dane1 and are used to
(1 or 2) corresponding to the desired driving position.
The seat and the outside rearview mirrors will move to
the position previously stored for the identified driver.
program and recall
You can also store an exit position for each driver. The
the driver's seat position
exit position is programmed by moving the seat to
and outside rearview mirror
the desired exit position and then holding the exit symbol
position.
button for more than three seconds. The exit position
set will be for the most recently selected driving position
(1 or 2). A double beep will sound when the memory
is set.
Adjust the driver's seat and the outside rearview mirrors
to the position you would like for driving. Then press
and hold memory button 1 for more than three seconds.
A double beep will sound when the memory seat and
mirrors are set.
To set the seat and outside rearview mirrors for a
button 2 instead.
" V V V l I U
capnnrl
rlri\mr
U , , . " .
,
fnllnw
I . . , , - . .
thn
I..-
nrcr\linl
r * - - . - - -
IC
stone
---
r - 7
hrlt
~ r e s s
To use exit, your vehicle must be in PARK (P). Push
and release the exit symbol button and the seat
will move to the exit position stored for the most recently
selected driver. You will hear one beep.
To stop recall movement of the seat at any time, press
one of the three memory buttons or one of the power
seat controls located on the outboard side of the
driver's
seat.
If your vehicle is equipped with a Driver Information
Center (DIC), you can use it to program certain functions
of the memory seats. See DIC Vehicle Personalization
on page 3-59.
2-57