Heated Seats; Memory Seat And Mirrors - Buick Enclave 2008 Owner's Manual

Heated Seats

On vehicles with heated front seats the controls are
located on the center console. To operate the heated
seats the engine must be running.
I
(Heated Seatback): Press this button to turn on the
heated seatback.
J
(Heated Seat and Seatback): Press this button to
turn on the heated seat and seatback.
The light on the button will come on to indicate that the
feature is working. Press the button to cycle through
the temperature settings of high, medium, and low and
to turn the heat to the seat off. Indicator lights above
the button will show the level of heat selected: three for
high, two for medium, and one for low.
The passenger seat may take longer to heat up.
If your vehicle has remote vehicle start and is started
using the remote keyless entry transmitter, the front
heated seats will be turned on to the high setting if it is
cold outside. See "Remote Vehicle Start" under
Remote Keyless Entry (RKE) System Operation on
page 2-5. When the key is inserted into the ignition and
the ignition is turned on, the heated seat feature will
turn off. To turn the heated seat feature back on, press
the desired button.
1-4

Memory Seat and Mirrors

On vehicles with the memory package, the controls are
located on the driver's doorl.
1: Saves the seating position for driver 1
2: Saves the seating position for driver 2
S
: Recalls the easy exit position.
To save your positions in memory, do the following:
1. Adjust the driver's seat, including the seatback
recliner, both outside mirrors, and the power
steering column to a comfortable position.
See Outside Power Mirrors on page 2-42 for more
information.
Not all mirrors will have the ability to save and
recall the mirror positions.
2. Press and hold button 1 until two beeps let you
know that the position has been stored.
A second seating and mirror position can be programmed
by repeating the above steps and pressing button 2.
To recall the memory positions, the vehicle must be in
PARK (P). Press and release either button 1 or button 2
corresponding to the desired driving position. The
seat, outside mirrors, and power steering column will
move to the position previously stored. You will hear a
single beep.