Exiting Programming Mode - Buick 2003 Rendezvous Owner's Manual

3. Count the number of chimes you hear. The number
of chimes indicates the vehicle's current
programmed mode. If you do not wish to change
the current mode, you can either exit the
programming mode by following the instructions
later in this section or program the next feature
available on your vehicle.
4. Press LOCK on the remote keyless entry transmitter
5. Press LOCK on the remote keyless entry transmitter
to change the current mode.
until you hear the number of chimes corresponding
to the mode selection you want.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
Exiting Programming Mode
To exit programming mode, do one of the following:
Press the odometer button, while in odometer mode,
turn the ignition key out of ON, or
for two seconds, or
do not program any commands for one minute
shift out of PARK (P). See
Shifting Out
of Park (P)
while in programming mode, or
on
page
2-30.
The programming mode message will turn off to let you
know that you are no longer in the programming mode.
2-56