3.11 - 30Xa 1702 module 2 (standard and option 254/255)
1
legend:
All dimensions are given in mm.
Required clearances for maintenance and air flow
1
Recommended space for evaporator tube removal
2
Water inlet (to be connected to water outlet of module 1)
Water outlet
Air outlet – do not obstruct
Power supply connection
C
Control circuit connection
3.12 - Multiple chiller installation
NOTE: If the walls are higher than 2 m, contact the factory.
A
B
B
B
B
1500
C
1
1
NOTE: Drawings are not contractually binding. Before
designing an installation, consult the certified dimensional
drawings supplied with the unit or available on request.
For the positioning of the fixing points, weight distribution
and centre of gravity coordinates please refer to the dimen-
sional drawings.
B
B
legend
A
Wall
B
Units
Module 1
A
B
B
1500
1500
13