Carrier Aqua Force 30XA Installation, Operation And Maintenance Instructions page 34

9.2.4 - 30Xa 602-802 - heat reclaim option
30XA 602-752 = 2852
30XA 802 = 2838
1500
9.2.5 - 30Xa 852-902 - heat reclaim option
2836
1500
legend:
All dimensions are given in mm.
1 Required clearances for maintenance and air flow
Recommended space for evaporator tube removal
2
Water inlet
Water outlet
Air outlet – do not obstruct
Power supply connection
Control circuit connection
C
Heat reclaim condenser
A
34
A
C
7186
A
7164
A
A
C
8380
A A
8358
ATTENTION: The Victaulic flange sleeves of the condenser
are not installed, but supplied with the unit. The sealing
joints are in the control box. The temperature sensors and
the condenser flow switch are wired and fixed in the
machine. They must be installed as described in the chapter
"Condenser water connections".
NOTE: Drawings are not contractually binding. Before
designing an installation, consult the certified dimensional
drawings supplied with the unit or available on request.
For the positioning of the fixing points, weight distribution
and centre of gravity coordinates please refer to the dimen-
sional drawings.
A
141.3
1500
A
Ø 168.3
1500
A
168.3
2253
A
2253