30Rw/30Rwa 020-045 - Unit With Hydronic Module (Option) And/Or Unit With Option 116E (Victaulic Water Connection At The Top); 30Rw/30Rwa 060-150 - Unit With Or Without Hydronic Module - Carrier Aquasnap 30RW Installation, Operation And Maintenance Instructions

3.2 - 30RW/30RWA 020-045 - unit with hydronic module (option) and/or unit with option 116E (Victaulic water
connection at the top)
1
700

3.3 - 30RW/30RWA 060-150 - unit with or without hydronic module

1
700
legend:
All dimensions are in mm.
Water inlet
Water outlet
A Condenser (water inlet/outlet for 30RW units)
B Evaporator
C Refrigerant inlet/outlet (30RW only)
Clearances required for maintenance
1
Power supply
C
A B
1
1204 700
C
B
A
2004
695
A
b
1
700
NOTE: Non-contractual drawings. Refer to the certified
dimensional drawings.
For the positioning of the fixing points, weight distribution
and centre of gravity coordinates, also refer to the certified
drawings.
For 30RWA units without condenser, installed with a
remote air-cooled condenser, the refrigerant inlet and
outlet position correspond to the condenser water inlets
and outlets. See C in the legend on the left.
30RW 020-030 30RW 040-045
1-1/4" Gas 2" Gas
1-1/4" Gas 2" Gas
1
900
895
1
900
9