Table of Contents
Advertisement
9.2.6 - 30Xa 1002 - heat reclaim option
2832
1500
legend:
All dimensions are given in mm.
Required clearances for maintenance and air flow
1
Recommended space for evaporator tube removal
2
Water inlet
Water outlet
Air outlet – do not obstruct
Power supply connection
C
Control circuit connection
Heat reclaim condenser
A
A
A
C
9574
A
A
9552
219.1
1500
ATTENTION: The Victaulic flange sleeves of the condenser
are not installed, but supplied with the unit. The sealing
joints are in the control box. The temperature sensors and
the condenser flow switch are wired and fixed in the
machine. They must be installed as described in the chapter
"Condenser water connections".
NOTE: Drawings are not contractually binding. Before
designing an installation, consult the certified dimensional
drawings supplied with the unit or available on request.
For the positioning of the fixing points, weight distribution
and centre of gravity coordinates please refer to the dimen-
sional drawings.
A
2253
35
Hide quick links:
Advertisement
Table of Contents
