Table of Contents
Advertisement
Rea® Focus™
CAUTION!
Risk of discomfort / insecurity
The table is not in a fixed position.
– Make sure to engage the table lock again after adjusting
the depth of the table.
CAUTION!
Risk of discomfort
– When adjusting the depth of the table, make sure not
to squeeze the stomach of the user.
5.5.3 Locking the table tray
WARNING!
Risk of injury
The user is locked in a fixed position and can not be
removed from the wheelchair without unlocking the
table.
– The use of locking device for table tray must be
prescribed by authorized personnel.
A
Place the locking pin A in the table attachment.
1.
Press the locking pin A inwards to unlock the table B.
2.
Keep pressing the locking pin inwards in order to keep
the table in an unlocked position .
3.
Release the locking pin A to lock the position of the table C.
5.6 Add a table tray cushion
A cushion for the table tray can be placed on the table tray in order
to have a softer surface for the arms and elbows.
24
C
B
A
B
Place the cushion for the table tray A on the table and place the
attachment straps B around the table.
5.7 Anti-tip device
WARNING!
Risk of tipping
– Do not forget to activate the anti-tip device when it
has been inactivated.
WARNING!
Risk of tipping
– Always use two anti-tip devices.
5.7.1 Mounting anti-tip device swing-away
C
1.
Insert the three screws A in the holes B of the rearwheel
attachment D.
2.
Fit the screws in the holes on the anti-tip device attachment C.
The anti-tip device can be mounted in different height
positions, depending on the placement of the screws.
3.
Tighten the screws firmly.
The distance between the wheel of the anti-tip device and
the rearwheel should be approximately 50 mm.
5 mm allen key / 10 mm fixed spanner
The rearwheel attachment D must be fitted facing forwards
in order for the anti-tip device to function properly.
D
A
B
1431580-B
Advertisement
Table of Contents
