Table of Contents
Advertisement
Using the Laser Pointer
You can use the laser to draw your audience's attention to a red dot that you can place on any object.
CAUTION:
• Do not look into the laser pointer while it is on.
• Do not point the laser beam at a person.
• Do not allow children to use the laser pointer.
Press and hold the LASER button to activate the laser pointer.
To disable the laser pointer, set the function switch to "Off".
Decide whether to enable or disable laser, then set the switch as necessary using the tip of a thin ball-point pen. On
this model, the other selector switch is not used.
ON
OFF
On: Enabled (the laser lights when the LASER button is pressed) [Factory default]
Off: Disabled (the laser does not light even when the LASER button is pressed)
Disable the laser when using in an environment in which the unit is accessible to children.
Using Remote Mouse Receiver (8767A/8769/8070 only)
See page 34.
AC
IN
Laser enable/disable
switch
Not used
70
7. Appendix
Advertisement
Table of Contents
