Table of Contents
Advertisement
Selecting a Source
Selecting the computer or video source
NOTE: Turn on the computer or VCR connected to the projector.
Using the cabinet buttons
Press any one of the COMPUTER 1/2
VIDEO and S-VIDEO buttons.
The corresponding indicator will light green.
Using the Remote Control (8767A/8769/8070)
Press any one of the COMPUTER 1/2, COMPONENT, VIDEO or S-
VIDEO buttons.
Selecting from the Source List (8771)
1. Press and quickly release the SOURCE button on the remote
control.
The Source list will be displayed.
2. Press and quickly release the SOURCE button to select the
source in the Source list.
Each time the SOURCE button is pressed, the selection in the
Source list will change as follows:
8771
Computer 1 → Computer 2 → Video → S-Video → Computer 1 → ...
3. Press the ENTER button to display the selected source.
NOTE: Highlighting the source for 2 seconds without pressing the ENTER
button will also display the selected source.
3. Projecting an Image (Basic Operation)
8767A/8769/8070
SOURCE
ASPECT
8771
SOURCE
ASPECT
25
LAMP
STATUS
POWER
VIDEO
S-VIDEO
SELECT
ON/STAND BY
L-CLICK
R-CLICK
MOUSE
VIDEO
COMPUTER
AUTO ADJ.
1
S-VIDEO
2
VOLUME
ASPECT
HELP
PICTURE
FREEZE
8771
PIC-MUTE
POWER
8771
PIC-MUTE
POWER
COMPUTER-1 COMPUTER-2
AUTO
ADJ.
Advertisement
Table of Contents
