Connecting Your Vcr Or Laser Disc Player - Dukane ImagePro 8070 User Manual

Connecting Your VCR or Laser Disc Player

S-Video cable (not supplied)
Video cable (not supplied)
VCR/ Laser disc player
Use an RCA or S-Video cable (not provided) to connect the video and use RCA cables (not provided) to connect
the audio from your VCR, laser disc player or document camera to your projector.
To make these connections, simply:
1. Turn off the power to the projector and VCR, laser disc player or document camera.
2. Connect one end of an RCA cable to the video output (or one end of an S-Video cable to the S-Video output
connector) on the back of your VCR or laser disc player, connect the other end to the appropriate video input
on your projector. Connect one end of a pair RCA cables (not supplied) to the audio output on the back of your
VCR or laser disc player, connect the other end to your audio equipment or to the appropriate audio input on
the projector.
Be careful to keep the right and left channel connections correct for stereo sound.
3. Connect the supplied power cable. See page 22.
4. Turn on the projector and the VCR or laser disc player.
NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video output
requirements.
NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via
a scan converter.
VIDEO IN
S-VIDEO IN
L R VIDEO S-VIDEO
AUDIO OUT VIDEO OUT
Audio cable (not supplied)
2. Installation and Connections
AUDIO
VIDEO IN AUDIO COMPUTER 1 IN AUDIO
L/MONO R
S-VIDEO IN AUDIO AUDIO OUT PC CONTROL
L/MONO R
MONITOR OUT
AUDIO
Audio equipment
21
COMPUTER 2 IN
AC IN
AUDIO IN
L R