Scaling Of Rot Output - Raytheon 138-118 Manual

4.2.1.4

Scaling of RoT Output

For the RoT--output an adjustment of the turn rate has to be performed.
Procedure:
-- Switch 3 of the DIP--Switch into the upper position.
Operation of push
after switching (B20)
switch 3 into the up-
-- By each operation of push button B23 annother rate of turn is selected and displayed.
-- Each adjusted rate has to be set wit push button B22 (right of the display).
The set format information blinks at the display.
-- After adjustment, the switch 3 has to be set into lower position.
Restriction:
If "Gy" as analog heading output is selected, than it is not possible to select a turn rate!
Edition: November 21, 2003
Distribution Unit
button B23
per position
1x
2x
3x
4x
138- -118
Display
--ro--
r 30 30 degree/minute
r100 100 degree/minute
r300 300 degreee/minute
Gy analog heading out-
23
DISTRIBUTION
Rate of Turn
put
UNIT
3647.DOC010302