Adjustment Of Nmea Formats - Raytheon 138-118 Manual

4.2.1.3 Adjustments of NMEA Formats
Each NMEA--interface can be adjusted depending the data--format.
Procedure for NMEA1:
-- Switch 1 of the DIP--Switch into the upper position.
Operation of push
after switching (B20)
switch 1 into the up-
*Adjustment of turn rate see section 4.2.1.4
-- By each operation of push button B23 annother format is selected and displayed.
-- This adjustment has to be performed for each connected channel and there for each
selected NMEA interface.
-- Each adjusted format has to be set wit push button B22 (right of the display).
The set format information blinks at the display.
-- After adjustment of all connected channels, the switch 1 has to be set
into lower position.
Edition: Feb. 23, 2004
Distribution Unit
button B23
per position
1x
2x
3x
4x
5x
6x
7x
HCxxx--telegrams contain heading from magnetic com-
pass. Not all heading--receivers are allowed to used this
heading source.
Telegramtypes "HC" are transmitted from the respective
channel also, when a Gyro is selected at the connected
Operation Unit.
138- -118
Display
nME1 NMEA Channel1
nME1.0 NMEA 1.0sec
nM0.1 NMEA 0.1sec
EHdT HEHDT--Telegram
CHdT HCHDT--Telegram
CHdG HCHDG--Telegram
IroT TIROT--Telegram*
EroT HEROT--Telegram*
21
DISTRIBUTION
Interface
3647.DOC010302
UNIT