Draytek VigorPro 5300 User Manual page 97

E x a m p
E x a m p
As stated before, all the traffic will be separated and arbitrated using on of two IP filters: call
filter or data filter. You may preset 12 call filters and data filters in Filter Setup and even
link them in a serial manner. Each filter set is composed by 7 filter rules, which can be
further defined. After that, in General Setup you may specify one set for call filter and one
set for data filter to execute first.
VigorPro5300 Series User's Guide
codepage, no decoding job of URL will be processed. Please use
the drop-down list to choose a codepage.
If you do not have any idea of choosing suitable codepage, please
open Syslog. From Codepage Information of Setup dialog, you will
see the recommended codepage listed on the dialog box.
Window size – It determines the size of TCP protocol (0~65535).
The more the value is, the better the performance will be. However,
if the network is not stable, small value will be proper.
Session timeout /Queue timeout–Setting timeout for sessions can
make the best utilization of network resources. However, Queue
timeout is configured for TCP protocol only; session timeout is
configured for the data flow which matched with the firewall rule.
Max. Queue length - When the network connection is not stable,
you can set large number for this setting to get better performance.
Yet large value will consume large resource.
Retransmission queue length – Type the number here as a base
for the router to verify if the retransmitted data is the same as the
old one.
l e
l e
89