Led Indicators And Connectors; For Vigorpro5300 - Draytek VigorPro 5300 User Manual

1 . 2 L E D I n d i c
1 . 2 L E D I n d i c
1 . 1 . 1 F o r V i g
1 . 1 . 1 F o r V i g
LED
ACT (Activity)
IDP (Intrusion Detection and
Prevention)
Virus
CSM
WAN1/2
MGMT
VPN
QoS
LED on Connector
WAN 1/2
LAN 1/2/3/4
2
a t o r s a n d C o
a t o r s a n d C o
o r P r o 5 3 0 0
o r P r o 5 3 0 0
Left LED
Right LED
Left LED
Right LED
n n e c t o r s
n n e c t o r s
Status Explanation
Blinking The router is powered on and running normally.
Off The router is powered off.
On The anti-intrusion function is enabled.
(Yellow)
On The anti-virus function is enabled.
(Yellow)
On The profile of CSM (Content Security
Management) for IM/P2P, URL content filter
and/or Web content filter application is enabled
from Firewall >> General Setup or Filter Setup.
(Such profile is established under CSM menu).
On The WAN1 or WAN2 port is connected.
Blinking It will blink while transmitting data.
On The router is managed by Telnet.
Blinking It will blink while being managed by IE browser.
On The VPN tunnel is launched.
Off The VPN tunnel is closed.
On The QoS function is active.
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 100Mbps.
Off The port is connected with 10Mbps
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 100Mbps.
Off The port is connected with 10Mbps
VigorPro5300 Series User's Guide