For Vigorpro5300Vs - Draytek VigorPro 5300 User Manual

1 . 1 . 4 F o r V i g
1 . 1 . 4 F o r V i g
LED
ACT (Activity)
IDP (Intrusion Detection and
Prevention)
Virus
CSM
WAN1/2
MGMT
Phone 1/2
LED on Connector
ISDN S0 1
ISDN S0 2
WAN 1/2
8
o r P r o 5 3 0 0 V S
o r P r o 5 3 0 0 V S
Left LED
(Orange)
Right LED
(Green)
Left LED
(Orange)
Right LED
(Green)
Left LED
(Green)
Status Explanation
Blinking The router is powered on and running normally.
Off The router is powered off.
On The anti-intrusion function is enabled.
(Yellow)
On The anti-virus function is enabled.
(Yellow)
On The profile of CSM (Content Security
Management) for IM/P2P, URL content filter
and/or Web content filter application is enabled
from Firewall >> General Setup or Filter Setup.
(Such profile is established under CSM menu).
On The WAN1 or WAN2 connection is ready.
Blinking It will blink while transmitting data.
On The router is managed by Telnet.
Blinking It will blink while being managed by IE browser.
On The phone connected to this port is off-hook.
Off The phone connected to this port is on-hook.
Blinking A phone call comes.
On ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is connected.
Blinking ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is not connected.
On A phone has been connected. If not, green LED will
be off.
Blinking An ISDN phone is off-hook or a phone call comes.
On ISDN NT (ISDN S0 intern) mode is active
configured from VoIP>>Phone Settings and an
ISDN phone adapter is connected.
Blinking ISDN NT (ISDN S0 intern) mode configured from
VoIP>>Phone Settings is active and an ISDN
phone adapter is not connected.
Off It means ISDN TE mode is active which is
configured from VoIP>>Phone Settings.
On A phone adapter with phone set has been connected
(ISDN S0 intern mode) or ISDN line has been
connected (ISDN S0 extern mode). It will be off if
there is nothing connected.
Blinking In ISDN NT (ISDN S0 intern) mode, it means an
ISDN phone is off-hook or a phone call comes.
In ISDN TE mode, it means data, fax or voice
(phone call) is transmitting.
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
VigorPro5300 Series User's Guide