Access Control - Draytek VigorPro 5300 User Manual

3 . 1 4 . 4 A c c e s
3 . 1 4 . 4 A c c e s
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the Access Control, a new web page will appear, as depicted below, so that you
could edit the clients' MAC addresses to control their access rights.
Policy
194
s C o n t r o l
s C o n t r o l
128-Bit - For 128 bits WEP key, either 13 ASCII
characters, such as ABCDEFGHIJKLM (or 26
hexadecimal digits leading by 0x, such as
0x4142434445464748494A4B4C4D).
All wireless devices must support the same WEP
encryption bit size and have the same key. Four keys can
be entered here, but only one key can be selected at a
time. The keys can be entered in ASCII or Hexadecimal.
Check the key you wish to use.
Select to enable any one of the following policy.
Activate MAC address filter- Allow to set MAC
address list for accessing Access Point. PCs with MAC
address not listed above cannot access AP. In addition,
selected station with MAC address listed above can be
isolated from LAN by checking Isolate the station from
LAN.
Blocked MAC address filter- Allow to set MAC
address list for denying access AP. However, stations
VigorPro5300 Series User's Guide