Draytek VigorPro 5300 User Manual page 201

Mode
WPA
WEP
VigorPro5300 Series User's Guide
There are several modes provided for you to choose.
Disable - Turn off the encryption mechanism.
WEP - Accept WEP client and the encryption key should
be entered in WEP filed below.
WPA/PSK - Accepts WPA clients and the encryption
key should be entered in PSK.
WPA2/PSK-Accepts only WPA2 clients and the
encryption key should be entered in PSK.
Mixed (WPA+WPA2)/PSK - Accepts WPA and WPA2
clients simultaneously and the encryption key should be
entered in PSK.
The WPA encrypts each frame transmitted from the radio
using the key, which either PSK entered manually in this
field below or automatically negotiated via 802.1x
authentication.
Type - Select from Mixed (WPA+WPA2) or WPA2 only.
Pre-Shared Key (PSK) - Either 8~63 ASCII characters,
such as 012345678..(or 64 Hexadecimal digits leading by
0x, such as "0x321253abcde...").
64-Bit - For 64 bits WEP key, either 5 ASCII characters,
such as 12345 (or 10 hexadecimal digitals leading by 0x,
such as 0x4142434445.)
193