Draytek Vigor 5510Gi User Manual page 95

3 . 7 . 2 . 3
3 . 7 . 2 . 3
To avoid confidential file being leaked out by someone else through network and cause
severe consequence, you can specify the file name in this page and determine to destroy or
scan or pass it while the file passes through the router.
To activate the File Patter List, you have to set one Anti-Virus profile on Defense
Configuration>>Anti-Virus>>Profile Setting. Also you can specify file names without
virus appended to be ignored by anti-virus server to improve the performance.
This page allows you to set 32 entries (rules) of file names to be filtered by the router. In
such case, the file format is ignored. The router will destroy, scan or non-scan the specified
filename according to the configuration that you set here.
Below is the page of File Pattern List. The priority of each entry is determined by the index
number. That is, the entry of Index 1 has the highest priority in file name filtering; the entry
of Index 32 has the lowest priority in filtering.
Default Action
Action
VigorPro5510 Series User's Guide
F i l e P a t t e r n L i s t
F i l e P a t t e r n L i s t
Choose one of the actions (Scan, Non-Scan, Destroy) as the
default action if the filename for one file does not meet the
conditions configured in these thirty-two entries.
Choose the action that you want to apply to the protocols of
each operation.
Destroy- Destroy the file with name specified here which is
found by the router system.
Non-Scan –The file will not be scanned and will not be
processed by using general rules set in Anti-Virus profile.
Scan – Just scan the file with name specified here which is
87