Draytek Vigor 5510Gi User Manual page 89

Enable Reset procession
3 3 . . 7 7 . . 1 1 . . 2 2
This page lists all the available types and allows you to adjust the rule setting for each type.
The rules will be applied by the options chosen in the page of Defense
Configuration>>Anti-Intrusion>>Basic Setup for Anti-Intrusion.
SID/Name
Search
Type links
After you click any one of type links, you can access into the rules setup page for activating
rules. We take the type of BO as an example. Below is the rules setup page for BO type.
For the detailed information about the full name, meaning of each rule and/or type, you can
click the name link list on the Anti-Intrusion Rules Setup page to connect VigorPro webpage
for viewing.
VigorPro5510 Series User's Guide
Click this radio button to break down the communication
between your computer and specific link which might have
intrusion actions.
A A d d v v a a n n c c e e d d S S e e t t u u p p
To find the specific type of anti-intrusion, you can type its
SID number or name in this field if you know, and then click
Search. The system will locate that type for you.
It can help the user to find out specific anti-intrusion rule
quickly.
Click any anti-intrusion type link to access into next page for
configuring the rules settings. Here we provide several rules
for each type. The factory types and rules for anti-intrusion are
shown in this page. If you want to acquire more types and
rules, please go to www.vigorpro.com and finish the
registration work. Later, the wide range of anti-intrusion types
will be added into this page.
81