Draytek Vigor 5510Gi User Manual page 38

(IPCP)
After finishing all the settings here, please click OK to activate them.
D e t a i l s
D e t a i l
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP
address to the WAN interface.
To use Static or Dynamic IP as the accessing protocol of the internet, please choose
Internet Access from WAN menu. Then, select Static or Dynamic IP mode for WAN2.
The following web page will be shown.
30
In this case, you can fill in this IP address in the Fixed IP field.
Please contact your ISP before you want to use this function.
WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use WAN
IP Alias. You can set up to 8 public IP addresses other than the
current one you are using.
Fixed IP – Click Yes to use this function and type in a fixed IP
address in the box of Fixed IP Address.
Default MAC Address – You can use Default MAC Address or
specify another MAC address by typing on the boxes of MAC
Address for the router.
Specify a MAC Address – Type the MAC address for the router
manually.
P a g e f o r S t a t i c
s P a g e f o r S t a t i c
o r D y n a m i c I P
o r D y n a m i c I P
VigorPro5510 Series User's Guide