Draytek Vigor 5510Gi User Manual page 56
Vigorpro 5510 series unified security firewall
Hide thumbs
Also See for Vigor 5510Gi:
- Specifications (2 pages) ,
- Declaration of conformity (1 page) ,
- Quick start manual (56 pages)
Table of Contents
Advertisement
Press any number under Index to access into next page for configuring port redirection.
Enable
Mode
Service Name
Protocol
WAN IP
Public Port
48
Check this box to enable such port redirection setting.
Two options (Single and Range) are provided here for you to
choose. To set a range for the specific service, select Range. In
Range mode, if the public port (start port and end port) and the
starting IP of private IP had been entered, the system will calculate
and display the ending IP of private IP automatically.
Enter the description of the specific network service.
Select the transport layer protocol (TCP or UDP).
Chose one set of WAN IP Alias address for applying port
redirection. If you do not set any WAN IP Alias address, you can
just choose All as WAN IP.
Specify which port can be redirected to the specified Private IP
and Port of the internal host. If you choose Range as the port
redirection mode, you will see two boxes on this field. Simply type
the required numbers on these two boxes.
VigorPro5510 Series User's Guide
Advertisement
Table of Contents
