Teledyne Echotrac E20 Operator's Manual page 39

HANDLING AND MAINTENANCE
Update E20 Software
(a) Click the Update tab.
(b) Click the ellipsis (...) button (1) and
navigate to the appropriate Windows
folder to select the UPDATE file.
Or drag and drop the UPDATE file onto
the application.
(c) For a standard update, select Keep
custom settings (default).
(d) The checkbox Download backup before
update is selected by default. If a backup
is not required, deselect this option.
(e) Click Update (2).
The system will reboot and start the
update with progress details displayed in
the status window.
Update mode is indicated by a steady
purple light on the E20 power button, and
the channel buttons will flash in purple as
the update is written to the E20.
(f) Once the update is complete, switch to
the Common tab:
(i) To rescan the E20 and verify that the
update has been applied.
(ii) To read the Log File.
Modify Network Settings
(a) Click the Network settings tab.
(b) Select the desired options:
 DHCP
 Static IP
(c) Click Apply.
(d) The E20 is automatically rebooted for the
settings to take effect.
Echotrac E20 Operator's Manual8
Version 8
p. 39 of 60
Uncontrolled Technology Subject to Restrictions Contained on the Cover Page.
November 25, 2020