Module Status Indication Interface - Quectel LTE-A Series Hardware Design

Table 18: Working State of Network Mode/Status Indication Pins
Pin Name Status
Always High
NET_MODE
Always Low
LEDs flicker slowly (200 ms High / 1800 ms Low)
LEDs flicker slowly (1800 ms High / 200 ms Low)
NET_STATUS
LEDs flicker quickly (125 ms High / 125 ms Low)
Always High
Below is a reference design of the network indicator.

3.15. Module Status Indication Interface

The STATUS pin is used to indicate the module's on or off status; It outputs high level when the module is
turned on.
EG060V-EA_Hardware_Design
Module
Network
Indicator
Figure 25: Reference Design of Network Indicator
EG060V-EA Hardware Design
Description
Registered on LTE network
Other circumstances
Network searching
Idle
Data transfer is ongoing
Voice calling
VBAT
2.2K
4.7K
47K
LTE-A Module Series
48 / 82