Invacare Elf 127em Instruction Manual page 14

Fitting a Spreader Bar or Pivoting Frame
1.
Remove the Spreader Bar shaft from the boom.
2. Insert the Spreader Bar shaft through the Spreader Bar or Pivoting Frame.
3. Attach Spreader Bar cover (Pivoting Frame only).
4. Place boom end cover over the Spreader Bar shaft. Squash it down to expose the bolt hole
in the Spreader Bar shaft.
5.
Insert bolt through clevis and shaft.
6.
Fit nut and tension to allow easy movement of Spreader Bar shaft.
7.
Fit boom end cover over end section of boom.
All information is subject to change without prior notice. Photographs are for illustration purposes only and may vary from product description.
Invacare ®
Elf 127em User's Manual
8
is a registered trademark and Yes, you can.™ is a trademark of Invacare ® Corporation. 2008 Invacare Asia Pacific