MSI Micro ATX Manual page 64

Chapter 3
Resume by Alarm
This function is for setting date and time for your computer to boot up. During
Disabled, you cannot use this function. During Enabled, choose the Date and
Time Alarm:
Date (of month) Alarm You can choose which month the system
Time (hh:mm:ss) Alarm You can choose what hour, minute and
Note: If you have change the setting, you must let the system boot up
until it goes to the operating system, before this function will work.
Reload Timer Events
Press <Enter> to enter the sub-menu and the following screen appears:
Primary/Secondary IDE 0/1, FDD/COM/LPT Port, PCI PIRQ [A-D]
Global Timer Events are I/O events whose occurrence can prevent the
system from entering a power saving mode or can awaken the system
from such a mode. In effect, the system remains alert for anything which
occurs to a device that is configured as Enabled, even when the system
is in a power down mode. Setting options: Disabled, Enabled.
Power Status LED
This item configures how the system uses power LED on the case to indicate
the sleep state. Available options are:
Single The power LED blinks to indicate the sleep state without chang-
ing its color.
Dual The power LED changes its color to indicate the sleep state.
will boot up. Set to 0, to boot every day.
second the system will boot up.
3-22