MSI Micro ATX Manual page 54

Chapter 3
to know the serial number.
Fast Boot
The setting allows the system to skip certain tests while booting. This will
decrease the time needed to boot the system. HDD will be the first boot device
if previous boot was successful to OS that supports Simple Boot Flag Spec.
Setting options: Enabled, Disabled.
Boot Up NumLock Status
This feature controls the functionality of the Numeric Keyboard at boot up. If
set to On, the Numeric Keyboard will function in the numeric mode (for typing
out numbers) but if set to Off, it will function in the cursor control mode (for
controlling the cursor). Setting options: Off, On.
Typematic Rate Setting
Key strokes repeat at a rate determined by the keyboard controller. When
enabled, the typematic rate and typematic delay can be selected. The settings
are: Enabled, Disabled.
Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a key stroke when you hold the key
down. The settings are: 6, 8, 10, 12, 15, 20, 24, 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the
keystroke. The settings are: 250, 500, 750, 1000.
Security Option
This specifies the type of BIOS password protection that is implemented. Set-
tings are described below:
Option Description
Setup The password prompt appears only when end users try to
run Setup.
System A password prompt appears every time when the com-
puter is powered on or when end users try to run Setup.
3-12