Maintaining The Pet Turboeraser® Tool; Maintaining The Brush Roll - Bissell PET HAIR ERASER PRO 2831 Series Quick Start Manual

Maintaining the Pet TurboEraser® Tool
Go to BISSELL.ca/support for additional accessories and replacement tools.
1. 2.
Twist gray collar counter- Remove Brush Roll, Belt and
clockwise, until slot appears, then Paddle Wheel. Inspect for damages
separate faceplate. and replace if necessary.
4.
To put faceplate back on, align
the tabs in the top of the cover and
place it down to "click" into place.

Maintaining the Brush Roll

Go to BISSELL.ca/support for tips on maintaining and replacing your Brush Roll.
1. 2.
Turn the machine OFF and press Twist the bottom screws with a
the Foot Release Button to disconnect coin to remove bottom cover.
the Motorized Cleaning Foot.
4. Reattach Brush Roll by inserting 5. Attach and secure bottom cover.
into the belt and pressing in to place.
6 BISSELL.ca
3.
To reassemble, align two clips
on each end of Paddle Wheel with
Belt on and pop back into place.
Place Brush Roll with Belt back in.
Faceplate will not close properly if
all parts are not aligned correctly.
3.
Remove the Brush Roll cover
and clear any debris from Brush
Roll.