Innovative Hearth Products
DRT2000-C Series Direct-Vent Gas Fireplaces
BARRIER INSTALLATION FOR D2000C SERIES
Installation (see Figures 36A and 36B)
1. Slide barrier into upper trim panel. NOTE: This panel will rotate for ease of installation.
Figure 36A - Slide Barrier into Upper Trim Panel
2. Lower barrier until it seats into the barrier support bracket. Barrier mesh shall be flush (as seen below) with sticker and spine facing
away from fireplace.
Figure 36B - Lower Barrier Until it Seats into the Barrier Support Bracket.
Barrier
Spline
Installation
900948-00C, 06/2019
Barrier
Barrier Support Bracket
45