Superior Fireplaces DRT2000-C Series Installation And Operation Instructions Manual page 58

Innovative Hearth Products
DRT2000-C Series Direct-Vent Gas Fireplaces
Installing the DRT2000-C 35 Series Log Set (continued)
6. Install back right log (4) (Figure 44). This log should be moved as far to the right as possible after installation on tab.
7. Tear the glowing embers into dime size pieces. Place glowing embers as shown in Figure 46.
8. Install the twig log (5) (Figure 45). This log rests on the left rear log and the grate.
Figure 44 - Place back right log (4)
1
This log (4) should be moved as far to the right as possible after installation on tab (e).
Top View
Figure 46 - Place glowing embers (rockwool)
58
4
3
Fits over Tab "e"
(Figure 40)
Bottom View
Figure 45 - Place twig log (5)
2
1
Left side of twig (5) will rest on landings of rear left log (3) and left front log (1) - See Figures
42 and 43. NOTE: If log is not stable, it is acceptable to rotate log to the left until stable.
Top View
Do NOT place embers on or close to large
ports or the pilot area.
NOTE: Enough glowing ember material is provided for several applications.
For best glowing effect, replace the ember material annually.
900948-00C, 06/2019
3
4
5
Bottom View
Operation
2