Superior Fireplaces DRT2000-C Series Installation And Operation Instructions Manual page 62

Innovative Hearth Products
DRT2000-C Series Direct-Vent Gas Fireplaces
Installing the DRT2000-C 45 Series Log Set (continued)
6. Install back right log (4) (Figure 58).
7. Tear the glowing embers into dime size pieces. Place glowing embers as shown in Figure 60.
8. Install the twig log (5) (Figure 59).
Figure 58 - Back Right Log (4)
Pin for log 5
(Figure 59)
1
Top View
Figure 60 - Place glowing embers (rockwool)
62
4
3
2
Fits over Tab "e"
(Figure 54)
Bottom View
Figure 59 - Place Twig Log (5)
5
1
Hole on bottom of twig (5) fits over pin on left rear log (3) - See Figure 58. NOTE: If log is not
stable, it is acceptable to rotate log to the left until stable.
Top View
Do NOT place embers on or close to large
ports or the pilot area.
NOTE: Enough glowing ember material is provided for several applications.
For best glowing effect, replace the ember material annually.
900948-00C, 06/2019
3
4
2
Hole for pin on log
3 (Figure 51)
Bottom View
Operation