Connections; Preparations; Cables Used For Connections; Connecting The - Denon DHT-FS5 Owner's Manual

Connections

• With the DHT-FS5, three sets of digital audio signals and analog audio signals can be input.
• Here we describe how to connect a DVD player, TV and subwoofer.
NOTE
• Do not plug in the power cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with connection cables. Doing so can result in humming or noise.

Preparations

Cables Used for Connections

Select the cables according to the equipment being connected.
Audio cables
Coaxial digital connections
( Black )
Coaxial digital (75 Ω/ohms pin-plug) cable
Optical digital connections (included)
Optical fiber cable
Analog connections (stereo) (included)
(White)
L
(Red)
R
Stereo pin-plug cable
Analog connections (monaural, for subwoofer)
(Black)
Pin-plug cable
Signal direction
Audio signal:
Output Input
Input Output
L
R
Connecting the TV
To enjoy surround-compatible digital broadcast programs, we recommend connecting the digital TV using
digital audio connections.
<View from the bottom>
TV
L R
or
L R
When playing the TV's sound over the DHT-FS5, set the TV's volume to the minimum.
NOTE
Remove the cap on the tip of the included optical fiber cable before connecting it.
ENGLISH