Kodak IMAGELINK 500 User Reference page 9

FUNCTION CODES
Using Function Codes
A-61409 April 1994
There are a variety of functions available which may be used
to temporarily change operating conditions and values, and
to obtain system and accessory status information.
To execute a Function Code:
• Press the F key.
• Press the numeric keys which correspond to the desired
Function Code.
• Press the Enter key.
Additional input may be necessary:
If the function is used to enable/disable an option (turn an
option on or off):
• Press the number one (1) key to turn the option ON;
or
Press the number zero (0) key to turn the option OFF.
• Press the Enter key.
If the function requires numeric input:
• Press the numeric key(s) required.
• Press the Enter key.
To cancel a function (before pressing the Enter key) or clear
the Status Display after executing a Function Code, press
the C (Clear/Cancel) key.
FC-1